抽沙船工作中造成吸沙泵發熱的原因
1.對于吸沙泵來說，流量超載會導致電機負載扭矩過大，接著就是電機電流變大。
2.高揚程的吸沙泵用于低揚程環境中，即用額定轉速更快，扇葉更小的沙泵替代原本應該額定轉速不快，扇葉更大的泵。
3.對于一臺高揚程的吸沙泵，若是實際情況不需要那么高的壓力，那么沙泵就會在低揚程下運行，此時吸沙泵的流量會比額定的高揚程下的流量大，這時的功率也會比額定的高揚程時高，所以容易超載。
Causes of fever caused by sand suction pump sand pumping work
1 for suction sand pump, flow overload will lead to motor load torque is too large, then the motor is large.
2 high lift sand suction pump for low lift environment, with rated speed faster, sand pump replacement fan should have smaller rated speed faster, more fan pump.
3 for the sand suction pump a high lift, if the actual situation does not require high pressure, then the sand pump will run in low head, sand suction pump flow than high lift under the rated flow at this time, when the power will be higher than the rated head high, so easy overload. |
.jpg)
