1）嚴禁長工夫抽大氣！嚴禁無油少油任務。在被抽系統與旋片真空泵鏈接處應該裝置真空閥，停機前應先封閉通道已避免真空由回流到被抽系統中！確保被抽系統無侵蝕性氣體；
2）嚴禁換用其他品種的油。必然要用專業的真空油。常常反省油位地位，不契合規則時須調整使之契合要求。以真空泵運轉時，油位到油標中間為準；
3）常常反省油質狀況，發現吸沙泵及蛻變應實時改換真空油，確保2X-4旋片真空泵任務正常；
4）換真空油的刻日，按實踐運用前提和可否知足功能要求等狀況思索，由用戶酌情決議。普通2x系列旋片式真空泵，抽除潔凈枯燥的氣體時，建議在任務100小時左右換油一次。待油中看不到黑色金屬粉末后，今后可恰當延伸改換真空油刻日；
1) no long time to pull the atmosphere! No oil less oil task. In the pumping system and rotary vane vacuum pump link should be a vacuum valve, should be closed before the closure of the channel has been avoided by the return to the vacuum pumping system! To ensure that the pumping system does not have corrosive gas;
2）嚴禁換用其他品種的油。必然要用專業的真空油。常常反省油位地位，不契合規則時須調整使之契合要求。以真空泵運轉時，油位到油標中間為準；
2) is prohibited for other varieties of oil. Must use a professional vacuum oil. Always check the oil level position, does not fit the rules must be adjusted to meet the requirements. The vacuum pump is running, the oil level to the middle oil standard shall prevail;
3）常常反省油質狀況，發現吸沙泵及蛻變應實時改換真空油，確保2X-4旋片真空泵任務正常；
3) often reflect on oil situation, found that the sand suction pump and transformation should be the timely replacement of vacuum oil, ensure the 2X-4 rotary vane vacuum pump working normally.
4）換真空油的刻日，按實踐運用前提和可否知足功能要求等狀況思索，由用戶酌情決議。普通2x系列旋片式真空泵，抽除潔凈枯燥的氣體時，建議在任務100小時左右換油一次。待油中看不到黑色金屬粉末后，今后可恰當延伸改換真空油刻日；
4) on the day of the vacuum oil, according to the practical application of the premise and can meet the functional requirements and other conditions, as appropriate, by the user. 2X series rotary vane vacuum pump, pumping air clean dry, suggestions about 100 hours in the task changing time. After the oil can not see the black metal powder, the future can be properly extended change the vacuum oil; |
.jpg)
